097-58001-01 Revision E – September 2006 TimeProvider TL1 Reference Guide 39
Chapter 2 TL1 Command Syntax and Description
Delete Security (DLT-SECU)
Delete Security (DLT-SECU)
This command deletes all of the information from the user database.
This command has a default access level of SECURITY.
Syntax
DLT-SECU:[<tid>]::[<ctag>];
Example
To delete all information from the user database, which includes three entries in this
example:
Input
DLT-SECU:::TP1000;
Normal Response
TP-SSU
05-02-10 13:35:56
M TP1000 COMPLD
;
Autonomous Message
TP-SSU 05-02-10 13:35:57
A 266 REPT EVT
"IMC,EQPT:USRDEL,TC,05-02-10,13-35-57,,,,:\"USER HAS BEEN DELETED\""
;
Note: The DLT-SECU command is typically used only after the initial
installation of the TimeProvider. When issued, all existing user names
and passwords are deleted from the user database. Anyone who logs
in to the TimeProvider in this condition has access to all commands.
Field Description
USRCLR All users have been deleted from the database.
To Next Page
Loading...
Need help?
General
