EasyManuals Logo

Symmetricom TimeProvider 1000 Reference Guide

Symmetricom TimeProvider 1000
180 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
097-58001-01 Revision E – September 2006 TimeProvider TL1 Reference Guide 81
Chapter 2 TL1 Command Syntax and Description
Retrieve Built-In Self Test (RTRV-BIST)
Retrieve Built-In Self Test (RTRV-BIST)
This command displays all currently active faulted built-in self test information for
either the IMC or IOC or both.
This command has a default access level of USER.
Syntax
RTRV-BIST:[tid]:<aid>:[<ctag>];
Normal Response
IMC
<cr><lf><lf>
sid date time<cr><lf>
M ctag COMPLD<cr><lf>
"IMC BIST"<cr><lf>
"<IMC condscr>"<cr><lf>*
;
IOC#
<cr><lf><lf>
sid date time<cr><lf>
M ctag COMPLD<cr><lf>
"IOC# BIST"<cr><lf>
"<IOC# condscr>"<cr><lf>*
;
Parameter Value Description
<aid> IMC Displays the currently active faulted built-in self test information
for the Information Management Card (IMC).
Note: See Table 2-13 for <condscr> descriptions.
IOCm Displays the currently active faulted built-in self test information
for the Information Management Card (IOC).
m = “1” for the slot marked “IOC 1" on the main shelf
m = “2” for the slot marked “IOC 2" on the main shelf
Note: See Table 2-13 for <condscr> descriptions.
Note: An asterisk (*) indicates that multiple lines could be listed; all
active alarm conditions are shown on separate lines.

Table of Contents

Other manuals for Symmetricom TimeProvider 1000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Symmetricom TimeProvider 1000 and is the answer not in the manual?

Symmetricom TimeProvider 1000 Specifications

General IconGeneral
BrandSymmetricom
ModelTimeProvider 1000
CategoryClock
LanguageEnglish

Related product manuals