097-58001-01 Revision E – September 2006 TimeProvider TL1 Reference Guide 35
Chapter 2 TL1 Command Syntax and Description
Cancel User (CANC-USER)
Cancel User (CANC-USER)
This command terminates the specified user’s session, and logs the user out of the
system.
This command has a default access level of USER. This command’s access level
cannot be changed.
Syntax
CANC-USER:[<tid>]:[<uid>]:[<ctag>];
Example
To terminate the current session for user "FRED":
Input
CANC-USER::FRED:TP1000;
Normal Response
TP-SSU
05-02-10 13:35:56
M TP1000 COMPLD
;
Autonomous Message
TP-SSU 05-02-10 13:35:56
A 2529 REPT EVT
"IMC,EQPT:LOGOUT,TC,05-02-10,13-35-56,,,,:\"USER LOGGED OUT, FRED\""
;
Parameter Value Description
<uid> text string The user name assigned to the user whose session is
being terminated.
Note: Users at the Admin or Security level can terminate
the active sessions of other users. In such cases, this
parameter must be specified. Including the <uid> in the
command line is not necessary for users to log themselves
out of their own user session.
(null) The owner’s current user session is terminated.
To Next Page
Loading...
