Symmetricom TimeProvider 1000 Reference Guide

097-58001-01 Revision E – September 2006 TimeProvider TL1 Reference Guide 121
Chapter 2 TL1 Command Syntax and Description
Retrieve PM (RTRV-PM)
Example
To retrieve PHASE1M data:
Input
RTRV-PM::IOC1-GPS:TP1000::PHASE1M;
Response Format
<cr><lf><lf>
sid date time<cr><lf>
M ctag COMPLD<cr><lf>
"IOCm-INPp:PHASE1M,<monval>,<vldty>,<sampledat>,<sampletim>"<cr><lf>
"<.>,<.>,<.>,<.>,<.>,<.>,<.>,<.>,<.>,<.>"<cr><lf>
"<.>,<.>,<.>,<.>,<.>,<.>,<.>,<.>,<.>,<.>"<cr><lf>
Response Example
TIMEPROVIDER 05-02-03 20:34:20
M TP1000 COMPLD
"IOC1-GPS:PHASE1M,84,COMPL,05-02-03,19-33-32"
"-1,1,0,-3,0,1,0,1,0,1"
"-1,0,1,-1,1,3,0,-1,2,0"
"0,-2,1,0,1,-5,5,2,0,-1"
"-1,2,0,-2,0,-1,2,0,0,-3"
"3,1,5,-1,4,0,-1,-2,1,1"
"1,-1,-1,1,1,-2,-4,-3,-2,0"
;
Example
To retrieve TDEV24 data:
Input
RTRV-PM::IOC1-INP2:TP1000::TDEV24;
Response Format
<cr><lf><lf>
sid date time<cr><lf>
M ctag COMPLD<cr><lf>
"IOCm-INPp:TDEV-a,<monval>,<vldty>,<sampledat>,<sampletim>"
"IOCm-INPp:TDEV-a,<monval>,<vldty>,<sampledat>,<sampletim>"
;
Notes:
To select a specific set of accumulated phase data from the previous
7 days, enter the start date (startdat), start time (starttim), stop
date (stopdat), and stop time (stoptim).
If any startdat or starttim combination is null or outside of the
previous 24 hour window, the current 24-Hour 1-Minute Phase data (1
nS resolution) is displayed.
The first line of the record has the first measurement requested, the
timestamp (<sampletim>, <sampledat>) are associated with this
measurement.

Symmetricom TimeProvider 1000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1000
Category	Clock
Language	English