Symmetricom TimeProvider 1000 Reference Guide

Appendix C Events
170 TimeProvider TL1 Reference Guide 097-58001-01 Revision E – September 2006
FWOK FIRMWARE UPGRADE SUCCESSFUL
FWLOAD BEGINNING FIRMWARE UPGRADE
IOCMODE IOC MODE IS. <mode>
IOCSTATE IOC STATE HAS CHANGED, <state>
RESET MODULE HAS BEEN RESET
IOC Clock Event Conditions
CLKFSTLK CLOCK ENTERED FAST-LOCK MODE
CLKLOCK CLOCK ENTERED LOCK MODE
SCAVAIL SMARTCLOCK ALGORITHM, <value>
IOC Input Event Conditions
CKTIDCHG INPUT CIRCUIT ID HAS CHANGED, <cktid>
CRCENA INPUT CRC HAS CHANGED, <value>
FRMTYPE INPUT FRAMING TYPE HAS CHANGED, <value>
INSTATE INPUT STATE HAS CHANGED, <value>
PRIORITY PRIORITY HAS CHANGED, <value>
RQLEVEL RECEIVED QUALITY LEVEL HAS CHANGED, <old quality value>, <new quality
value>
QLEVEL USER ASSIGNED QUALITY LEVEL HAS CHANGED, <value>
SSMBIT E1 SSM BIT HAS CHANGED, <bit position>
SSMENA INPUT READING OF SSM HAS CHANGED, <value>
THRCHG PM THRESHOLD HAS CHANGED,<PM type>, <value>
IOC Output Event Conditions
CKTIDCHG OUTPUT CIRCUIT ID HAS CHANGED, <cktid>
CRCENA OUTPUT GENERATION OF CRC HAS CHANGED, <value>
FREEFLT FREE-RUN OUTPUT FAULT STRATEGY HAS CHANGED, <state>
FRMTYPE OUTPUT FRAMING TYPE HAS CHANGED, <value>
HOLDFLT HOLDOVER OUTPUT FAULT STRATEGY HAS CHANGED, <state>
OUTSTATE OUTPUT GROUP STATE HAS CHANGED, < value >
SSMBIT E1 OUTPUT SSM BIT HAS CHANGED, <bit position>
Table C-2. Event Code Condition Descriptions (Continued)
Event ID
Event Condition Description

Symmetricom TimeProvider 1000 Specifications

General

Brand	Symmetricom
Model	TimeProvider 1000
Category	Clock
Language	English