Manual Mode – Quick Guide: Running Samples
Sysmex House, Garamonde Drive, Wymbush, Milton Keynes, MK8 8DF, United Kingdom · Phone +44 333 320 3460 · Fax +44 1908 267 901
academy.training@sysmex.co.uk· www.sysmex.co.uk
4. Open the manual magazine holder cover, pullout the holder and load the magazine. You can
load either sections or both if required. The left hand-side magazine will be processed first.
5. Push the magazine hold back into the analyser and close the magazine holder cover.
6. Select [Mode] from the status area. The [Preparation Mode] dialog box will open. Select
[Staining] followed by [OK].
To Next Page
Loading...
