Manual Mode – Quick Guide: Running Samples
Sysmex House, Garamonde Drive, Wymbush, Milton Keynes, MK8 8DF, United Kingdom · Phone +44 333 320 3460 · Fax +44 1908 267 901
academy.training@sysmex.co.uk· www.sysmex.co.uk
Place the sample tube in to the correct position in the sample holder.
Press the start switch on the front of the main unit. The sample holder will retract and smear preparation
starts. When the sample aspiration is completed the sample holder is ejected out automatically.
Once complete, remove sample and close the sample tube holder by pressing the mode switch on the
front of the main unit.
The prepared smears, once complete will be fed out into the manual magazine holder.
To Next Page
Loading...
