TA I
NSTRUMENTS
DSC A
UTOSAMPLER
CE 6–17
The Keyboard Test
The Keyboard test checks that all Autosampler
CE keys are working properly.
1. Access the Autosampler CE keypad by
loosening the captive thumbscrews on the
keypad cover and tilting the cover down.
2. Press the TEST key five times. The Auto-
sampler CE screen displays:
Test
Keyboard
3. Press ENTER to select the test displayed on
the screen.
4. Press each key on the Autosampler CE
keyboard (except the ESCAPE/CLEAR
key), and watch the screen to ensure that
the key displayed on the screen matches the
one you are pressing.
For example, if you press the MANUAL/
AUTOMATIC key, the Autosampler CE
screen should display:
Manual
Automatic
5. Press ESCAPE/CLEAR when you are
ready to exit the Keyboard test.
When you have finished using the Autosampler
CE keypad, remember to close the keypad cover
and finger-tighten the thumbscrews before
starting a method.
Autosampler CE Test Functions
NOTE:
To Next Page
Loading...