Diagnostics
6–28 TA I
NSTRUMENTS
DSC A
UTOSAMPLER
CE
Fatal Error
Unknown Interr.
(unknown interrupt)
Problem: The processor has been interrupted
from normal operation for an unknown
reason.
Solution: Turn off the Autosampler CE, and
power up again. If you still receive this
message, call a qualified service
representative.
Fatal Error
Watchdog Timeout
Problem: The Autosampler CE has detected an
internal electronics or software
malfunction.
Solution: Turn off the Autosampler CE, and
power up again. If you still receive this
message, call a qualified service
representative.
To Next Page
Loading...