TA Instruments DSC Autosampler CE - Page 173

TA I NSTRUMENTS DSC A UTOSAMPLER CE 6–41
Error Messages
GPIB Error 59
non-num pan num.
(non-numeric pan number)
Problem: The sample pan number in a GPIB
command contains a non-numeric
character.
Solution: Close the DSC Instrument Control
window, and turn off the Auto-
sampler CE. Then restart the Auto-
sampler CE, reopen DSC Instrument
Control, and retry your operation.
GPIB Error 60
bad pan number
Problem: The sample pan number in a GPIB
command does not exist.
Solution: Close the DSC Instrument Control
window, and turn off the Autosampler
CE. Then restart the Autosampler CE,
reopen DSC Instrument Control, and
retry your operation.
GPIB Error 62
no pan number
Problem: A GPIB command sent to the Auto-
sampler CE does not contain a pan
number.