RSA-G2 Getting Started Guide Page 28
RSA-G2 Accessories
The Camera (for use with an FCO only) allows for viewing of the sample at any point during an
experiment. For additional information, refer to TRIOS Help.
Camera Accessory
CAUTION: To avoid potential damage to the camera, be sure that the air inlet tube and all
electrical connections are properly connected.
MISE EN GARDE: Pour éviter des dégâts potentiels à la camera, assurez-vous que le tuyau
d'arrivée d'air et tous les raccordements électriques sont correctement effectués.
NOTE: For Camera accessory installation instructions, refer to TRIOS software Help.
The FCO can be optionally equipped with a camera viewer with remote illumination and focusing. Used in
conjunction with streaming video and image capture software, the camera displays real-time images in the
software; an image is stored with each data point for viewing during or after a test. The FCO Camera
viewer is an ideal tool for data validation.
Figure 15 Camera accessory installed on FCO.
Camera
enclosure
FCO mounted
on right side
of RSA-G2
To Next Page
Loading...
Need help?
General
