Takeuchi TB153FR User Manual

117
MAINTENANCE
Maintenance Chart
Maintenance Items See page
Every 500 Hours
Replacing the hydraulic oil return filter 137
Replacing the fuel filter 137
Every 1000 Hours
Cleaning the engine cooling system 138
Replacing the air cleaner element 140
Replacing the air breather filter 141
Replacing the travel motor gear oil 141
Inspecting and adjusting the engine valve clearance 141
Retightening the engine cylinder head bolts 141
Inspecting the engine fuel injection pressure and spray condition 141
Every 2000 Hours
Replacing the hydraulic oil and cleaning the suction strainer 142
Inspecting the engine fuel injection timing 144
Inspecting the engine fuel injection valve 144
When Required
Inspecting and replenishing the windshield washer fluid 145
Cleaning the water separator 145
Lubricating the levers 146
Adjusting the gap between the bucket and arm < TB180FR > 147
Replacing the bucket 148
Replacing the bucket teeth and the side cutters < TB153FR > 150
Replacing the bucket teeth and the side cutters < TB180FR > 152
Tilting up the platform 154
Inspecting the rubber crawlers 155
Replacing the rubber crawlers < TB153FR > 156
Replacing the rubber crawlers < TB180FR > 158

Takeuchi TB153FR Specifications

General

Engine Make	Yanmar
Engine Model	4TNV88
Tail Swing Type	Zero Tail Swing
Maximum Reach	5, 570 mm
Max Reach Ground Level	5, 570 mm
Transport Width	2, 000 mm
Transport Height	2, 600 mm