212
OPTIONS
An alarm is sounded when the machine
travels and stops when traveling is stopped.
If the alarm does not sound when the
machine travels, the fuse may be blown.
Inspect the fuse.
WARNING
If the fuse which has just been replaced
should blow again, there is a problem in
the electrical system. This could cause
fires. Contact a Takeuchi dealer.
1. Park the machine in a safe place.
2. Set the starter switch to OFF.
3. Open the fuse box cover (1).
4. Inspect for blown fuse.
5. If a fuse is blown, replace it with a spare
fuse of the same capacity.
Travel Alarm
E4J007
NormalBlown
Fuse Layout and Circuits Protected
< TB153FR >
20A Horn
10A Radio,
Interior light
10A Lever lock
5A Lights
30A Wiper,
Cigarette lighter
10A Optional
Travel alarm
10A Throttle controller
30A Emergency stop
relay
5A Controller (ACC),
Accessory relay
5A Instrument cluster
5A Interference
prevention
Capacity
Protected circuit
Capacity
Protected circuit
< TB180FR >
20A Horn
10A Radio,
Interior light
10A Lever lock
30A Lights
30A Wiper,
Cigarette lighter
10A Optional
Travel alarm
10A Controller
30A Stop solenoid
5A Controller (ACC),
Accessory relay
5A Instrument cluster
Feed pump
5A Interference
prevention
Capacity
Protected circuit
Capacity
Protected circuit
To Next Page
Loading...
