203
OPTIONS
Load Safety Device
Overload Warning Device
If a weight greater than the machine is
designed to lift is lifted, the overload warning
device is activated and a horn is sounded
(when the overload warning switch is turned
on).
WARNING
Continuing to apply the load after the
overload warning horn sounds could
result in the machine tipping over or the
emergency shut-off valve being activated.
If the horn sounds, stop operating the
machine and lighten the load.
Overload warning switch (2)
™ position ..... OFF
I position ..... ON
When the emergency shut-off
valve is activated, the
overload warning horn stops.
(This is because the pressure
sensor can no longer detect
hydraulic pressure.)
To Next Page
Loading...
