Takeuchi TB153FR User Manual

227
OPTIONS
Immobilizer System
5. Return to the OFF (O) position from the
ON ( I ) position and remove the
registration key.
6. Within 10 seconds, insert the immobilizer
key into the starter switch and turn it from
the OFF (O) position to the ON ( I )
position.
7. Hold for about 10 seconds.
8. Return to the OFF (O) position from the
ON ( I ) position and remove the
immobilizer key.
9. Perform steps (6) to (8) for all immobilizer
keys (maximum of 5 keys) that you wish
to register.
10. Within 10 seconds after registering the
immobilizer keys, insert the registration
key into the starter switch and turn it from
the OFF (O) position to the ON ( I )
position.
11. Hold for about 10 seconds.
12. Return to the OFF (O) position from the
ON ( I ) position and remove the
registration key.
This completes the registration procedure.
13. Check that the engine starts using all the
registered keys (registration key and
immobilizer keys).
If the engine does not start, re-register
the keys.
If the engine still does not start, consult a
Takeuchi sales or service outlet.
N0B030E
Registration key
N0B027E
Immobilizer key
N0B028E
Immobilizer key
N0B029E
Registration key
N0B030E
Registration key

Takeuchi TB153FR Specifications

General

Engine Make	Yanmar
Engine Model	4TNV88
Tail Swing Type	Zero Tail Swing
Maximum Reach	5, 570 mm
Max Reach Ground Level	5, 570 mm
Transport Width	2, 000 mm
Transport Height	2, 600 mm