Takeuchi TB153FR User Manual

73
OPERATION
Starting and Stopping the Engine < TB180FR >
Stopping the Engine
IMPORTANT: Do not stop the engine
suddenly when operating with heavy
loads or at maximum speed. Doing so
may cause the engine to overheat or
seize. Never bring the engine to a sudden
stop except in the case of a true
emergency.
1. Press the decel. button or return the
throttle controller.
2. Idle the engine for about 5 minutes to
gradually let it cool.
3. Turn the key to the OFF position to stop
the engine.
Warming Up the Engine
IMPORTANT: Avoid racing the engine
until it is warmed up.
Do not warm up the engine for long
periods of time (20 minutes or more).
1. Idle the engine and run it for about 5
minutes with no load.
2. Press the decel. button to return to the
engine speed set with the throttle
controller.
PREHEAT
OFF
ON
START
E4D007

Takeuchi TB153FR Specifications

General

Engine Make	Yanmar
Engine Model	4TNV88
Tail Swing Type	Zero Tail Swing
Maximum Reach	5, 570 mm
Max Reach Ground Level	5, 570 mm
Transport Width	2, 000 mm
Transport Height	2, 600 mm