78
OPERATION
(1) Offset the boom to the front of the
operator’s seat and move the boom near
the cab.
Offset the boom to the right and move
the bucket near the cab.
(2) Offset the boom fully to the right and
check that it can be set to the maximum
rear inclination.
(3) Offset to the left in the posture in (2)
above
Operation when the boom has stopped
automatically
1. If the boom has stopped while rising:
Operate the boom downward.
2. If the boom has stopped while offsetting
to the left:
a. Operate the boom downward to move
it outside the automatic stop range.
b. Offset to the left.
Offsetting to the right is possible
regardless of the boom’s posture.
1
L2D009
2 3
L2D010
Machine Operation
To Next Page
Loading...
