TallyGenicom Matrix Printer - Page 359

The syntax for the parameters, the start, separate and stop code is represented as
follows:
Figures (n) Start code Stop code
ASCII
hex.
dec.
"0" to "9"
30 to 39
48 to 57
":"
3A
58
":"
3A
58
For the parameter (here n), a distinction must be made between two types of repre-
sentation:
if the parameter is in pointed parentheses, the decimal value must be transmitted
if the parameter is not in pointed parentheses, the ASCII value must be transmitted
Example:
Parameter representation: <n>, with n=0
to be transmitted: dec.0 (hex.00)
Parameter representation: n, with n=0
to be transmitted: ASCII "0" (hex.30, dec.48)
Character explanation and symbol descriptions
Information/important notes
[ ] Optional, must be not necessarily be transmitted
9-needle printer
24-needle printer
4 Introduction