88
12.
After making the Initial Network settings, return the computer
network settings back to the original ones.
Follow steps 1-4 above to open the [Internet Protocol Version 4 (TCP/IPv4) Properties]
window. Re-enter the [IP address], [Subnet mask], [Default gateway], [Preferred DNS
server], and [Alternate DNS server] that you had written down before and click the [OK]
button.
- If [Obtain an IP address automatically] was set as the original setting, select it again without entering the
IP address, Subnet mask…. in that area.
13.
Open the browser, enter the address (URL) that you set in the
Settings Utility and check to make sure that the display is proper
or not.
- If after having followed the above procedures you still cannot view the display properly, please connect
your network administrator. Some environments such as a company network may have special settings.
To Next Page
Loading...
