TDK-Lambda Genesys Series - Select the Control Method

8
8303460000 Rev A IA672-04-01-Rev. I
2.3. LAN Command Speed
The following communication speeds are typical values only. In addition to the variability in
the Genesys™ LAN interface, there are timing variations within the controller and the
network routing.
The following speed specifications are subject to change without notice.
Testing was done using a single-client TCP socket application with the power supply set for
a static IP address.
Typical Command or query speeds:
90% of
Commands
in less than:
100% of
Commands
in less than:
Most Commands and Queries
This includes the commands not listed below:
VOLT n.nn VOLT?
MEAS:VOLT?
OUTP:STAT 1 OUTP:STAT?
VOLT:LIM:LOW n.nn VOLT:LIM:LOW?
SOUR:MOD?
55 mSec
85 mSec
System Queries
Examples:
SYST:ERR?
*ESR?
10 mSec
15 mSec
Status Register Queries
Examples include:
STAT:QUES:COND?
STAT:OPER:COND?
35 mSec
60 mSec
Instrument Select for Multi-drop
Example:
INST:SEL nn
260 mSec
410 mSec
Identity Query
Example:
*IDN?
125 mSec
135 mSec
Operation Complete
Example:
*OPC?
3 mSec
4 mSec