- 14 -
EO1-11115
MA-186-100 SERIES
Month-Day-Year order
Month Day Year
NOTE: The date set/print order is Month-Day-Year. If you want to change the order into
Day-Month-Year or Year-Month-Day, see Chapter “16. System Option Setting”,
Address 16 - Bits 7 and 8 on page 81.
Examples) To set 28 May, 1997:
Month
(01 to 12)
Day
(01 to 31)
Declaration of Program No. 6
for Date Setting
○○○
Issues a
receipt.
Year
(97, 98, etc.)
Z
OFF
X
REG
SET
Day-Month-Year order
Day Month Year
Year-Month-Day order
Year Month Day
Receipt Print Format:
Date Setting or Adjustment
The register has a calendar function. Once the date and time are correctly set, the day automatically
advances at midnight even when the power is turned off. The extra day of a leap year is also computed
automatically.
Condition: Any time outside a sale; refer to “NOTE on Condition” on page 15.
Setting Procedure:
Use the MA Key to turn the Control Lock to “SET”.
→ → → →
825
0
@/FOR
AT/TL
6
79
508
2
79
507
9
82
Program No. for Date Setting
Date now set
(28 May, 1997 in this example)
Date
(before this date setting)
Receipt Consecutive No.
Current Time
Thank you
Call again
04.- 15.- 9 7
0.6
★
05.- 28.- 9 7
000.9
08-5 0
To Next Page
Loading...
