TEC EO1-11115 - Address: 8

- 76 -
EO1-11115
MA-186-100 SERIES
Address: 8 Initial SET Bit Nos. → 1
Your Selection →
([Chg] Key Function)
Content
Bit
No.
Selective Status
RESET
SET
Tender and Total Functions in finalizing a sale in REG
mode
-- vacant --
Cashing with no purchase, using this key
Over-tendering (tendering an amount larger than the sale
total, resulting in calculation of change due): effective only
when Bit 1 is RESET
-- vacant --
1
2
3
4
5 to 8
TENDER or
TOTAL
TOTAL only
PROHIBITED
ALLOWED
ALLOWED
PROHIBITED
Supplementary Description for Address 8:
Bit 1: RESET status .................... The key functions as Tender Key with a prior amount
entry or as Total Key without any amount entry.
SET status.......................... The key functions as Total Key only.
Bit 3: RESET status .................... Cashing with no purchase is prohibited.
SET status.......................... Cashing with no purchase is allowed outside a sale.
Bit 4: This Bit status selection is effective only in tendering operation and only when Bit 1 is
RESET.
SET status.......................... If this bit is SET and also Address 11 - Bit 1 is SET (for
Short-tendering Prohibited), an amount equal to the sale
total is always required for tendering.
-- Addresses 9, 10 are vacant. --