TEC FS-2700 - Loan and Pickup Operations

Functions Outside of a Sale FS-2700 Owner’s Manual
4-4
4.2 Loan/Pickup

This function uses the following options:
• BANK LOAN field in the Job Code Setup table allows the
employee to receive a Bank Loan.
∗
The function can be set to prompt automatically when
the user logs into the system with the REQUIRE LOAN
option in the Job Code table.
• The PRNT L/PU CHIT option in the System Config table can
be set so a receipt is printed with each Loan/Pickup.
• The PRMPT PKUP INFO option in the System Config table
can be set to prompt for a 20-character line of information.
4.2.1 Loan
Procedure
1. Press {LOAN/PICKUP}.
2. If prompted, index a manager I.D. number and press {TOTAL}.
• NOTE: The Loan will be posted to the employee logged on
to the workstation, not the approving manager.
3. Screen prompts:
1 – Loan, 2 - Pickup
4. Index {1} for LOAN to take money out of the cash drawer.
5. Screen prompts:
Enter amount
6. Index the amount of the Loan and press {TOTAL}.
7. Screen displays the amount entered for verification and prompts:
1 – Yes, 0 - No
8. To accept the amount, index {1}.