Accessing the System FS-2700 Owner’s Manual
2-6
2.3 Login/Logout
Logging into the system allows access, as the user’s security level
permits, to guest check handling and Manager Mode.
NOTES
An employee can be logged into one station at a time.
Only one employee can be logged into a station at one time, and
that user’s security level determines what functions are
accessible.
• An AUTO LOGOUT function can be set for a Job Code that
will automatically log the user out after a check service round
is completed.
• An option in System Config, POS AUTOLOGOUT will
automatically log the user out if a station is not active after a
set amount of minutes.
If the employee is required to Clock In (User Setup, page 2 #1),
the Job Code entered during the clock in will also be used for the
Log In.
An employee’s shift begins with {LOGIN}, and continues until that
employee’s User Report is cleared with a Z Report.
A Job Code can be set up to require a bank loan function when
an employee logs in with the REQUIRE LOAN flag.
A password can be assigned to an employee in the User Setup
table that must be used each time the employee logs in.
The One-Touch login feature used on the FS-3600 is not
available on the FS-2700 workstation.
To Next Page
Loading...
