TEC FS-2700 - Programming Options for Z Reports

FS-2700 Owner’s Manual Reports
5-35
5.16.1 Programming Options for Z Reports
The following table lists programming options that affect Z Reports.
Refer to the Programming Manual for more explanations.
Page /
Option Option Description
Station Setup Table
3 / 4
Allow Z Report
3 / 6 Require Cash Declaration on Station Z
System Setup Table / System Configuration
1 / 6 Week Ending
 If a Weekly Z is attempted on a day other than the one set
here, the screen prompts:
Not week end day. Continue?
 The Daily Z report will not be allowed on this day of the
week. When the Weekly is done, both the Daily and
Weekly reports will be cleared.
2 / 6 Z With Open Checks
 This option allows the Z with Open Checks but does not
keep them open unless the 24 HOUR option is set.
4 / 1 Create Export
5 / 9 24 Hour
5 / 11
PTD Totals
 Creates Period To Data Reports. If this is not set, only
Daily and Weekly reports will be created.
 This option applies to both Sales and Timekeeping reports.
6 / 4 Append Export Files
6 / 5 Backup Files
7 / 1 Fixed Position in Export Files
7 / 5
Restrict Station Z
7 / 7 Report Station Present
8 / 3 Export Line Header
8 / 8
Month Backup File
9 / 6
Close with Sales