Guest Check Functions FS-2700 Owner’s Manual
3-8
3.2.5 Override Meal Period
Meal Period times are set up for each day of the week in the Meal
Period Setup table. The current setting can be overridden for the
current check only or for all checks until the System Z report is done.
The change can affect one terminal or all terminals.
For One Check Only
1. Press the {MEAL~PERIOD~#} key wanted for this check.
• The override setting reverts to the programmed Meal Period
setting after the check is sent.
All Checks Today
1. Press {STAY~DOWN}.
2. Press the {MEAL~PERIOD~#} key wanted.
3. Screen prompts:
Broadcast changes?
1 – Yes, 0 - No
4. Index {1} and press {TOTAL} for the change to be effective at all
stations in the system.
Index {0} and press {TOTAL} for the change to affect this station
only.
• The override setting will be effective until the Meal Period is
changed again, or until the next System Z report is done.
To Next Page
Loading...
