Guest Check Functions FS-2700 Owner’s Manual
3-22
3.4.2 With {HOLD~ORDER}
This feature allows remote orders to be grouped from different guest
checks into a single remote order. Set the following options to use
this feature:
The {HOLD~ORDER} key type is used to prompt the server to hold
remote printing.
• When the server’s response is Yes, items from the current
check are held.
• When the server’s response is No, items from the different
checks print as a single order.
LAST TICKET field in the Station Setup table sets the default for
the {HOLD~ORDER} key to None, Yes or No.
• {HOLD~ORDER} is a toggle key. This setting decides what the
initial answer is. The key toggles between Yes and No with
each depression.
Procedure (Sample)
This sample procedure uses the setting of the LAST TICKET field as
Yes and combines two guest checks on the remote printer(s).
1. Enter items for first guest check.
2. Press {HOLD}.
3. Screen prompts:
Hold Order: Yes
• YES prevents this order from printing on the remote
printer(s) this round.
4. End service round by pressing {PRINT~CHECK}, {TOTAL} or
{MEDIA}.
5. Check clears the screen.
6. Enter items for the second guest check.
7. Press {HOLD~ORDER}.
8. Screen prompts:
Hold Order: Yes
To Next Page
Loading...
Need help?
General
