FS-2700 Owner’s Manual Guest Check Functions
3-39
3.10 Check Adjustments
3.10.1 Void Items on Stored Checks
Remove Single Items
The same procedure is used to void items before or after sending.
After a menu item has been sent/stored and the check recalled, the
{VOID} key can only be used according to the security level set in
the Function Setup table.
Procedure
1. Recall the check.
2. Press {VOID}.
3. If prompted, index a manager approval I.D. and press {TOTAL}.
4. Use the up and down arrow keys to highlight the item to be
removed from the check.
• Highlighting a primary Menu Item automatically highlights the
item’s modifiers.
5. Press {VOID}.
6. The item is removed from the check.
Remove All Items
The same procedure is used to void all items before or after sending.
After a check has been sent/stored and the check recalled, the
{VOID~ALL~ITEMS} key can only be used according to the security
level set in the Function Setup table.
Procedure
1. Recall the check.
2. Press {REMOVE~ALL~ITEMS}.
3. If prompted, index a manager approval I.D. and press {TOTAL}.
4. The entire check is voided.
To Next Page
Loading...
Need help?
General
