TEC FS-2700 - Add to Stored Check Using Table

FS-2700 Owner’s Manual Guest Check Functions
3-37
3.9.4 Add to Stored Check Using Table #
This procedure is identical to using {ADD~TO~CHECK} except it is used
on checks with assigned table numbers. The current check can be
new (in the first service round).
1. Enter items for a new check, or recall a stored check.
2. Press {ADD~TO~TABLE}.
3. Screen displays a numbered list of this server’s checks that have
assigned table numbers.
4. Index the number for the table wanted.
• If there are separate checks for the table, the screen will
display a numbered list of the checks. Index the number of
the check wanted.
• Items from the current check are added to the check of the
table number entered. That check now displays on the
screen.
5. Repeat steps 2 – 5 as needed to combine more checks.
6. End the service round by pressing {TOTAL}, {MEDIA} or
{PRINT~CHECK}.