TEC FS-2700 - Transfer from a Server

FS-2700 Owner’s Manual Guest Check Functions
3-33
3.8.3 Transfer from a Server
The server who takes the check from the server/bartender who
created it uses this procedure.
Procedure
1. Press {XFER~CHK~FROM~SVR} key.
2. Screen prompts:
Enter check number
3. Index the check number being picked up and press {TOTAL}.
4. If the default Order Type for the new server requires a table
number and the check does not have one assigned, screen
prompts:
Enter table number
5. Index the table number and press {TOTAL}.
6. If the default Order Type for the new server requires a # of guest
entry and the check does not have one assigned, screen
prompts:
Enter guest count
7. Index the number of guests and press {TOTAL}.
8. Press the {TOTAL} key the end the procedure. Check is
transferred.