Guest Check Functions FS-2700 Owner’s Manual
3-14
Enter Modifiers With Forced Display
The number of items that may be entered from a modifier screen is
set in the Menu Setup table.
Procedure
1. Press the {MENU~ITEM} key for the item wanted.
• It is added to the check.
2. A list of modifiers display. Press a key to choose a modifier.
3. The modifier screen will clear according to its setting in the Menu
Item’s programming.
• If this Forced Display allows one selection, the screen will
clear after one choice is made.
• If this Forced Display allows more than one selection, the
screen will clear after that number of choices are made.
• If a limit is not set (if it is zero), up to 18 selections from the
Forced Display list can be entered. The screen will continue
to redisplay the list until the {TOTAL} key is used to exit.
• If MORE displays at the bottom of the list, there are more
choices. Use {PgDn} to scroll thru the list.
4. When all choices are made from the Forced Display(s), press
{TOTAL}.
MORE
indicates
there are
additional
choices.
{PgDn}
to display
more
items.
To Next Page
Loading...
