Guest Check Functions FS-2700 Owner’s Manual
3-32
3.8.2 Transfer to a Server
The server who created the check does this procedure. The server
receiving the check must have logged in today.
Procedure
1. Recall the check. Should be recalled by the server responsible
for the check.
2. Press {XFER~CHK~TO~SVR} key.
3. Screen prompts:
Enter ID
4. Index the I.D. number of the server the check is being
transferred to and press {TOTAL}.
5. If the default Order Type for the new server requires a table
number and the check does not have one assigned, screen
prompts:
Enter table number
6. Index the table number and press {TOTAL}.
7. If the default Order Type for the new server requires a # of guest
entry and the check does not have one assigned, screen
prompts:
Enter guest count
8. Index the number of guests and press {TOTAL}.
9. Press the {TOTAL} key to the end the procedure. Check is
transferred.
To Next Page
Loading...
Need help?
General
