TEC TECDrive20-EU Series - Page 76

TECDrive20-EU Series Inverter Function parameters
-71-
Function
code
Name
Description
Default
Modify
module
temperature
P07.12
Converter
module
temperature
-20.0–120.0°C
●
P07.13
Software
version
1.00–655.35
●
P07.14
Local
accumulative
running time
0–65535h
●
P07.15
High bit of
power
consumption
Display the power used by the inverter.
The power consumption of the inverter
=P07.15×1000+P07.16
Setting range of P07.15: 0–65535kWh (*1000)
Setting range of P07.16: 0.0–999.9kWh
●
P07.16
Low bit of
power
consumption
●
P07.18
Rated power of
the inverter
0.4–3000.0kW
●
P07.19
Rated voltage
of the inverter
50–1200V
●
P07.20
Rated current
of the inverter
0.1–6000.0A
●
P07.21
Factory bar
code 1
0x0000–0xFFFF
●
P07.22
Factory bar
code 2
0x0000–0xFFFF
●
P07.23
Factory bar
code 3
0x0000–0xFFFF
●
P07.24
Factory bar
code 4
0x0000–0xFFFF
●
P07.25
Factory bar
code 5
0x0000–0xFFFF
●
P07.26
Factory bar
code 6
0x0000–0xFFFF
●
P07.27
Type of
present fault
0: No fault
1: Inverter unit U phase protection (OUt1)
2: Inverter unit V phase protection (OUt2)
3: Inverter unit W phase protection (OUt3)
4: Overcurrent during acceleration (OC1)
5: Overcurrent during deceleration (OC2)
●
P07.28
Type of the last
fault
●
P07.29
Type of the last
but one fault
●