EasyManua.ls Logo

TechniSat DIGITRADIO 585

TechniSat DIGITRADIO 585
364 pages
Go to English
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
59
DE
EN
FR
IT
NL
DA
PL
SK
SL
To add a station to the My favourites list, keep the OK buon pressed during
playback until "Favourite added" appears. Or you can hold down one of the
number buons 1 - 12 to save a station to it.
To obtain additional information on the station currently being played, press
the INFO buon (Section 6.4.6).
To add your own stations or favourites, please register them on the website:
hp://nuvola.link/sr. To do so, you need an access code that you can request
in the DIGITRADIO 585 under [Internet Radio > MENU > Station list> Help].
9 Spotify Connect
Use your smartphone, tablet or computer as a remote control for Spotify.
You can find out more by going to www.spotify.com/connect.
The Spotify soware is subject to third-party licences that you can find here:
hp://www.spotify.com/connect/third-party-licenses
10 Playing music (UPnP & USB media)
You have the option of playing music media stored on a UPnP server or on a
connected USB mass storage device via the DIGITRADIO 585. To do this, firstly a
connection to the WLAN network is required and, secondly, the USB medium must
be aached to the USB port.
Please observe the instructions in Section 17.2 for seing up a LAN/WiFi connection.
The UPnP media server must be located on the same network as
theDIGITRADIO 585.
> Press the MODE buon as oen as required until [Play music] is shown in
the display.
Alternatively:
> Press the MENU buon and then select [Main menu> Play music].
If you are in a submenu, select the main menu as described in Section 7.1.
If you are starting Internet radio for the first time without having configured
a WiFi connection, the search wizard appears which shows you all the WiFi
networks within range. Use the / and OK buon to select the WiFi
network you recognise and enter the password using the displayed keyboard.
Then select and press the OK buon. If the password entered is
correct a connection to the network is now established. The signal bar
in the status bar of the display indicates whether the connection has been
established.

Table of Contents

Related product manuals