TechniSat DIGITRADIO 585 - Language; Factory Settings; Software Update

73
DE
EN
FR
IT
NL
DA
PL
SK
SL
> Select [Time Updates] to determine whether time updates should be
automatic via DAB, FM or the Internet, or whether you would like to enter it
manually.
> To do so, select [DAB update], [FM update], [NETupdate] or [No update].
> Under the [Set format] option you can activate 12 or 24 hour format.
Confirm your selection with the OK buon.
> Under [Set time zone], select the current time zone in your location.
> Under [Summertime] you specify whether summertime should currently be
active.
17.4 Language
> Press the MENU buon and then select [Main Menu > System Seings >
Language].
If you are in a submenu, select the main menu as described in Section 7.1.
> Using  or , select the language and confirm the selection by pressing OK.
17.5 Factory seings
If you change the location of the device, e.g. when moving house, it is possible that
the saved stations can no longer be received. In this case you can reset the device
to factory seings to delete all the saved stations and then launch a new scan.
> Press the MENU buon and then select [Main Menu > System Seings >
Factory Seings].
If you are in a submenu, select the main menu as described in Section 7.1.
> Confirm by pressing OK.
> Use  or  to select Yes and confirm the confirmation prompt by pressing
OK.
All previously stored stations and seings will now be deleted. Aer reseing,
you can start or skip the set-up wizard (Section 17.7).
17.6 Soware update
From time to time soware updates may be provided which may contain
improvements or bug fixes. This keeps the DIGITRADIO 585 permanently up-to-date.