TechniSat DIGITRADIO 585 - Info; Display Backlight

75
DE
EN
FR
IT
NL
DA
PL
SK
SL
Aer a search for available wireless networks you are shown the result.
> Select the wireless network you want and confirm the selection with OK.
Select [Skip WPS] to enter the password.
If it is a protected network you will be asked to enter the corresponding
access key.
> To do this, mark the respective character.
> Enter the selected character by pressing the OK buon.
Proceed in this way until the complete access key can be seen in the input
field.
To cancel the entry, select and press the OK buon. If you make a
typing error you can delete the last leer entered using .
> Then select and press the OK buon. If the password entered is
correct a connection to the network is now established.
> If [Set-up wizard completed] appears in the display, press the OK buon.
17.8 Info
> Press the MENU buon and then select [Main Menu > System Seings >
Info].
If you are in a submenu, select the main menu as described in Section 7.1.
> Confirm by pressing OK.
> The soware version is shown.
> You return to the menu by pressing the MENU buon.
17.9 Display backlight
It is possible to set the display brightness both for operation and standby.
> Press the MENU buon and then select [Main Menu > System Seings >
Backlight].
If you are in a submenu, select the main menu as described in Section 7.1.
> Select [Operation] or [Standby] to apply the seing for operating mode or
standby mode.