Teleste MPH241 - CLI Device Management Commands (Devmgmt)

79 MPH200 series video encoders CLI user manual
**************************************
devmgmt menu
**************************************
reboot
softfactoryreset
hardfactoryreset
licenseupdate
swversion
swud
getconf
putconf
up
help
exit
-------------------------
Devmgmt command
Enter the devmgmt command to view devmgmt menu:
Available CLI commands in devmgmt menu. These commands allows
you to manage device, as make factory resets, update rmware and
save/restore device settings.
Entering help reboot displays information about the reboot command:
reboot
Description:
Reboot the device.
softfactoryreset
Description:
Soft factory resets the device. Specific configurations will
be reset to factory defaults. The device will reboot on this
command
hardfactoryreset
Description:
Hard factory resets the device. All configurations will be
reset to factory defaults. The device will reboot on this
command
Entering help softfactoryreset displays information about the
softfactoryreset command:
Entering help
hartfactoryreset displays information about the
hartfactoryreset command:
Use the reboot command to restart
the device.
Use the softfactoryreset command to
make soft factory reset to the device.
Use the hartfactoryreset command to
make hard factory reset to the device.