Teleste MPH241 - CLI Ethernet Switch Commands (Ethswitch)

81 MPH200 series video encoders CLI user manual
**************************************
ethswitch menu
**************************************
help
Commands at top level:
System - System commands
Console - Console commands
Port - Port commands
MAC - MAC commands
VLAN - VLAN commands
Aggr - Aggregation commands
LACP - IEEE 802.3ad Link Aggregation commands
RSTP - IEEE 802.1w Rapid Spanning Tree commands
User Group - User Group commands
QoS - QoS commands
Mirror - Mirror commands
IP - IP commands
Dot1x - Dot1x commands
IGMP - IGMP Snooping commands
Debug - Debug commands
>ENDOFCMD
-------------------------
Ethswitch command
CLI lets you manage device’s internal Ethernet switch. Enter the
ethswitch command to view ethswitch menu:
Use the help command to see
information on a command (usage:
enter “help + the specied command”,
for example: help help displays
information from help command.
These commands allows you to manage Ethernet Switch settings. To get
more information about how to use a specic CLI command on the menu,
enter help + command, for example: port help displays all commands at
port level.