84 MPH200 series video encoders CLI user manual
LACP command
Enter the lacp command to go to system level:
RSTP command
Enter the rstp command to go to console level:
Commands at LACP level:
LACP Configuration [<portlist>]
LACP Mode [<portlist>] [enable|disable]
LACP Key [<portlist>] [<key>|auto]
LACP Status
LACP Statistics
Commands at RSTP level:
RSTP Configuration [<portlist>]
RSTP sysprio [<sysprio>]
RSTP hellotime [<secs>]
RSTP maxage [<hops>]
RSTP fwddelay [<secs>]
RSTP version [normal|compat]
RSTP Mode [<portlist>] [enable|disable]
RSTP Aggr [enable|disable]
RSTP Edge [<portlist>] [enable|disable]
RSTP Pathcost [<portlist>] [<pathcost>|auto]
RSTP mcheck <portlist>
RSTP Status
RSTP Statistics
User Group command
Enter the user group command to go to system level:
Commands at User Group level:
User Group Configuration
User Group Add <grouplist> [<portlist>]
User Group Delete <grouplist>
User Group Lookup <grouplist>
To Next Page
Loading...
