Televic Confidea - Confidea Wireless System; Installation and User Manual

Confidea Wireless System Installation and User Manual
Televic Conference Systems 2012-05-11 44
Figure 10.5: LED indicators
Hard ware version 0.01
Table 10.1: LED 1 (Blue) - Mode
OFF No connection
SLOW BLINKING Slave mode Confidea CU
BLINKING Slave Mode TCS5500
ON Standalone mode
Table 10.2: LED 2 (Red) - RF link quality
OFF RF LINK OK
SLOW BLINKING 10<SNR
AVG
<15
BLINKING 5<SNR
AVG
<10
ON SNR
AVG
<5
Table 10.3: LED 3 (Blue) - Status
BLINKING No units initialized
ON
At least 1 unit has been
connected with the WCAP
All 3 LEDs blincking simultaneously indicate network
errors (e.g. wrong slave setting)
Hardware version ≥ 0.02
Table 10.4: LED 1 - Mode
ON Stand alone mode
BLUE BLINKING Slave mode Confidea CU
GREEN BLINKING Slave Mode TCS5500
Table 10.5: LED 2 (Red) - RF link quality
OFF RF LINK OK
SLOW BLINKING 10<SNR
AVG
<15
BLINKING 5<SNR
AVG
<10
ON SNR
AVG
<5
Table 10.6: LED 3 (Blue) - Status
BLINKING No units initialized
ON
At least 1 unit has been
connected with the WCAP
All 3 LEDs blincking simultaneously indicate network
errors (e.g. wrong slave setting)