16. Stand alone system
16.1. Basic discussion
In a basic setup where only discussion is applicable,
the Wireless Conference Access Point WCAP (see link
to chapter WCAP) acts as a central control unit.
This means the system can operate without the need
of an extra central control unit (Confidea CU or
CPU5500).
Units applicable to this setup are listed below:
− Confidea DD
− Confidea CD
In a standalone configuration power needs to be
supplied to the WCAP separately. (see chapter WCAP
power supply)
Configuration and monitoring of the system can be
done via the build-in web server, which is accessible
via a standard web browser. (See section 3 system
configuration)
Figure 16.1: Stand alone set up for basic discussion
Note:
In this case the chairman needs to guide
the meeting by using his prior and
nextbutton. Microphone activation by an
operator is not possible via web server
application.
To Next Page
Loading...
