Attention : The name of the file must be exactly
“ language_display.bin ”
A reboot op the DU’s is needed to activate the
new templates : Select “Reboot DU’s”
(*) Remark :
Uploading language display templates is only
needed for delegate units with WDU SW version
1.12 or older.
Uploading language display templates can also
be done via TIS2500 and TIS5500 user SW
12. Web server
12.1. Setup
12.1.1. Summary
Device information
General device information is summarized in this
section.
− System Name: Displays the system name.
Configured in the TCP/IP settings page.
− IP Address: Displays the device IP address.
− Subnet Mask: Displays the currently configured
IP subnet mask.
− Address Mode: Displays the protocol used to
define the IP address.
−
Base MAC Address: Displays the device MAC
address.
System Information
Here you can find information about the components
inside the system.
Hardware components and software components
each have their own version.
− Serial Number: Displays the serial number of the
device.
− Model Name: Displays the device model name.
− Hardware Version: Displays the hardware
version number.
− Boot Version: Indicates the system boot version
currently running on the device.
− Firmware Version: Displays the
firmware/software version.
− FPGA VHDL Version: Displays the VHDL version
for the FPGA.
To Next Page
Loading...
