14.6. Adding a unit with a
customized encryption
Follow the next steps to add a new unit in a Confidea
wireless system that is configured to use a
customized encryption key.
Step 1 – Select the Default encryption key
Please refer to the Setting the default encryption
(ref.) for more information.
Step 2 – Initialize the new unit
Add the new unit to the initialization list. This step is
only required if the access point is configured to
work in manual initialization mode. Otherwise the
unit will be automatically initialized. Please refer to
the initialization chapter (ref.) for more information.
Step 3 – Apply the customized encryption key
to the initialized units
After the new unit is initialized the customized
encryption key can be assigned to the newly added
units. Therefore follow the steps described in the
Setting a customized encryption section (ref.).
14.7. Using multiple
customized keys
It is possible to assign up to 15 different encryption
keys. You can update all your units with the
customized keys or just a subset. This way you can
select the units that can join the conference by
selecting the appropriate encryption key.
To Next Page
Loading...
