Teltonika FMB010 - SMS command list

56
Longitude, Altitude, Speed, Date, Time
ggps
Returns location information with Google maps link
Yes
readio
Returns IO status
Yes
cpureset
Resets device
No
getparam
Returns selected parameter value
Yes
setparam
Sets selected parameter value
Yes
flush
Redirects device to other server
Yes
countrecs
Returns record number
Yes
setdigout X,Y
Set digital output
X – 0 or 1
(0 - OFF or 1 – ON)
Y – timeout value if needed (in seconds)
Yes
fc_reset
Resets fuel consumption parameters
Yes
towingreact
Towing reactivation
Yes
btgetlist
Returns requested Bluetooth list(values:0, 1, 2)
Yes
btgscan
Starts Bluetooth scan(values: none, 1)
Yes
btvisible
Sets Bluetooth to visible with TMO
Yes
btrelease
Disconnects from current device and pauses auto connect
functionality for TMO
Yes
btunpair
Unpair Bluetooth device
Yes
faultcodes
Fault codes reading from OBD
Yes
obdinfo
Returns OBD info. Protocol, VIN, AdaptiveTiming value,
requested PID counter, OBD application state,
available vehicle PIDs, mil status, number of DTCs
Yes
Setparam and setdigout SMS is used to configure device.
Parameter ID consists of 3 or 5 digits. Detailed list of parameters and IDs can be found in
chapter number 5.2 “System parameters”
Example: ‘username password setparam 102:0’ will disable sleep mode.
Example: ‘username password setdigout 1 60’ will set digital output ON for 60s
6.1.1 getinfo
Response details
Description
RTC
RTC Time
GPS
GPS receiver state. 0 – OFF, 1 – restarting, 2 – ON but no fix, 3 –ON and
operational, 4 – sleep mode
SAT
Average satellites
Example: RTC:2017/1/9 14:13 GPS:1 SAT:0
6.1.2 getver
Response details
Description
App Ver
Firmware version
Modem Ver
Version of modem application
GPS Ver
Version of GPS module