64
GPRS content activation
(ID=2000)
6.4.6 Target Server Port (ID=2005)
Parameter defines AVL data destination server port number. Example: 12050
Goes with (depends on)
parameters
GPRS content activation
(ID=2000)
6.4.7 Protocol (ID=2006)
Parameter defines GPRS data transport protocol. Module can use TCP or UDP transport
protocol to send data to server. For TCP protocol value is 0, for UDP protocol value is 1.
Goes with (depends on)
parameters
GPRS content activation
(ID=2000)
6.5 SMS/Call settings
6.5.1 SMS data sending settings (ID=3000)
Parameter allows or does not allow sending AVL data using binary SMS. If SMS use is not
allowed value is 0 and 1 if SMS use is allowed.
Goes with (depends on)
parameters
6.5.2 Data send number (ID=3001)
In this field are written GSM numbers, to which will be sent Data SMS.
Goes with (depends on)
parameters
6.5.3 Authorized phone numbers (ID=4000-4009)
If at least one number is entered then only those number can send messages to device.
Number must be entered without “+” or “00”.
Example: 37060012346
Goes with (depends on)
parameters
To Next Page
