Teltonika FMB010 - Bluetooth; External PIN (ID=806); Connection mode (ID=807); Authorized devices MAC list (ID=830 - 834)

82
Minimum
value
Maximum
value
default value
Goes with (depends on)
parameters
Value
type
0 symbols
30
symbols
0
string
6.11.1.7 External PIN (ID=806)
Defines external device’s PIN, for FMB010 to auto connect to.
Minimum
value
Maximum
value
default value
Goes with (depends on)
parameters
Value
type
0 symbols
8 symbols
0
string
6.11.1.8 Connection mode (ID=807)
Defines a mode in which FMB010 will connect to external devices. 0 – None,
1 – FMB010 will connect to Hands Free Headset, 2 – FMB010 will connect to OBDII
Bluetooth dongle.
Minimum
value
Maximum
value
default value
Goes with (depends on)
parameters
Value
type
0
2
0
U64
6.11.1.9 Authorized devices MAC list (ID=830 - 834)
Parameter allows to add an authorized devices MAC for connection to FMB010
Minimum
value
Maximum
value
default value
Goes with (depends on)
parameters
Value
type
0 symbols
12 symbols
-
String
6.12 I/O parameters
I/O properties are additional data sources which are recorded along with usual GPS data.
6.12.1 I/O#1 property parameter Ignition (ID=50000)
Parameter defines I/O property value. Possible values: 0-Disabled; 1-Low; 2-High; 3-Panic.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
3
-
I/O#1 priority (ID=50000)
I/O#1 logic operand (ID=50001)
I/O#1 High level (ID=50002)
I/O#1 Low level (ID=50003)
I/O#1 Event only (ID=50004)
I/O#1 averaging length (ID=50005)
S8
6.12.2 I/O#1 Logic operand (ID=50001)
Parameter defines eventual record is saved. Possible values: 0 – On Exit; 1-On Entrance;
2-Both; 3-Monitoring; 4-Hysteris; 5-On Change; 6-On Delta Change
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
6
0
I/O#1 priority (ID=50000)
I/O#1 logic operand (ID=50001)
S8