Teltonika FMB010 - Scenarios Accelerometer; Eventual records (ID=11501); Unplug detection mode (ID=11502); Send sms to (ID=7067)

80
0
3
0
U64
6.10.1.2 Eventual records (ID=11501)
If enabled, only eventual records of unplug detection will be sent. 0 – Disable, 1 - Enable
Minimum
value
Maximum
value
default value
Goes with (depends on)
parameters
Value
type
0
1
1
U64
6.10.1.3 Unplug detection mode (ID=11502)
Sets Unplug detection mode. 0 – simple, 1 – advanced.
Simple – unplug detection according to external voltage only
Advanced – unplug detection according to: external voltage OR accelerometer
Minimum
value
Maximum
value
default value
Goes with (depends on)
parameters
Value
type
0
1
0
U64
6.10.1.4 Send sms to (ID=7067)
Enable/disable sms event sending. 0 – Disable, 1-10 – sms will be sent to configured GSM
number. (SMS \ Call Settings -> GSM Predefined Numbers list.)
Minimum
value
Maximum
value
default value
Goes with (depends on)
parameters
Value
type
0
10
0
U64
6.10.1.5 SMS Text (ID=8067)
Configure uplug sms event text here.
Minimum
value
Maximum
value
default value
Goes with (depends on)
parameters
Value
type
0
160
0
U64
Note: „Unplug Detection“ work just in device with battery. FMB010 doesn‘t have this.
6.10.2 Crash Detection
6.10.2.1 Scenario settings (ID=11400)
Sets priority of the scenario: 0 – Disable, 1 – Low Priority, 2 – High Priority, 3 – Panic
Priority
Minimum
value
Maximum
value
default value
Goes with (depends on)
parameters
Value
type
0
3
0
U64
6.10.2.2 Duration [ms] (ID=11401)
Minimum
value
Maximum
value
default value
Goes with (depends on)
parameters
Value
type
0
2000
5
U64
6.10.2.3 Treshold [mG] (ID=11402)
Minimum
Maximum
default value
Goes with (depends on)
Value