Teltonika FMB010 - I;O parameters; I;O#1 High level (ID=50002); I;O#1 Low level (ID=50003); Ι;Ο#1 Event only (ID=50004)

83
I/O#1 High level (ID=50002)
I/O#1 Low level (ID=50003)
I/O#1 Event only (ID=50004)
I/O#1 averaging length (ID=50005)
6.12.3 I/O#1 High level (ID=50002)
Parameter defines high value of triggered I/O property. This parameter is used to set
thresholds for I/O properties to generate events.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on) parameters
Value
type
-2147483647
2147483647
1
I/O#1 priority (ID=50000)
I/O#1 logic operand (ID=50001)
I/O#1 High level (ID=50002)
I/O#1 Low level (ID=50003)
I/O#1 Event only (ID=50004)
I/O#1 averaging length (ID=50005)
S32
6.12.4 I/O#1 Low level (ID=50003)
Parameter defines low value of triggered I/O property. This parameter is used to set
thresholds for I/O properties to generate events.
Minimum
value
Maximum
value
Recommended
value
Goes with (depends on) parameters
Value
type
-2147483647
2147483647
0
I/O#1 priority (ID=50000)
I/O#1 logic operand (ID=50001)
I/O#1 High level (ID=50002)
I/O#1 Low level (ID=50003)
I/O#1 Event only (ID=50004)
I/O#1 averaging length (ID=50005)
S32
6.12.5 I/O#1 Event only (ID=50004)
Parameter defines whether element should be sent only when event is generated.
Possible values:
1 – Yes (parameter ID and value is sent when event is generated);
0 – No (parameter ID and value is sent in every record).
Minimal
value
Maximum
value
Recommended
value
Goes with (depends on)
parameters
Value
type
0
1
0
I/O#1 priority (ID=50000)
I/O#1 logic operand (ID=50001)
I/O#1 High level (ID=50002)
I/O#1 Low level (ID=50003)
I/O#1 Event only (ID=50004)
I/O#1 averaging length (ID=50005)
S8