Tenda AX3000 User Manual

28
Step 1 Configure RADIUS client
1. In the Computer Management dialog box, double-click Internet Authentication Service,
right-click RADIUS Clients, and choose New RADIUS Client.
2. Enter a RADIUS client name (device name of the AP is recommended) and the IP address
of the AP, and click Next.
IP address of the AP

Tenda AX3000 Specifications

General

Wi-Fi Standard	Wi-Fi 6 (802.11ax)
MU-MIMO	Yes
Beamforming	Yes
OFDMA	Yes
Frequency Bands	2.4 GHz, 5 GHz
Ports	1 x 10/100/1000 Mbps WAN port, 3 x 10/100/1000 Mbps LAN ports
Antenna	4 x external antennas
Security	WPA3, WPA2, WPA, WEP
Button	WPS/Reset