Tenda O1 User Manual

112
8 Advanced
8.1 LAN Rate
8.1.1 Overview
Choose Advanced > LAN Rate to enter the page.
This module enables you to change LAN speed and duplex mode settings.
When you change the settings, ensure that the LAN speed and duplex mode of the port of the CPE is the same as
that of the corresponding peer device. By default, the LAN speed settings of the two ports are both Auto
Negotiation.
8.1.2 Changing the LAN Speed and Duplex Mode
Configuration Procedure
Step 1 Choose Advanced > LAN Rate.
Step 2 Select a LAN speed and duplex mode for each LAN port.
Step 3 Click Save.
----End

Tenda O1 Specifications

General

5 GHz	No
Bandwidth	2.4 GHz
Networking standards	IEEE 802.11b, IEEE 802.11g, IEEE 802.11n
Maximum data transfer rate	300 Mbit/s
Placement	Wall
Certification	FCC/CE/RoHS
Product color	White
LED indicators	LAN, PoE, WLAN
International Protection (IP) code	IP64
Output voltage	9 - 12 V
Power consumption (max)	2.6 W
Security algorithms	WEP, WPA-PSK, WPA2-PSK
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Antenna features	Integrated antenna
Cables included	LAN (RJ-45)
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	-30 - 55 °C
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	67.5 mm
Width	80 mm
Height	190.35 mm